玻璃珠（玻璃微珠）100目

 玻璃珠（玻璃微珠）

 规格：60目、80目、100目

 耐磨型

化学成分 %

物理性

规格 фmm

比重大、强度高、磨耗低、化学稳定性好，适合于中、高粘度物料、高固成份物料及超细磨的干磨、湿磨、与氧化锆珠比较，以机模磨损小。

sio2  73.44

比　重 : 2.8g /cm3
假比重 : 1.65g /cm3
显微硬度 :≥ 720kg /mm2
    

ф0.6-0.8ф2.0-2.5
ф0.8-1.0ф2.5-3.0
ф1.0-1.5ф3.0-3.5
ф1.5-2.0ф3.5-4.0
ф4.0-5.0ф5.0-6.0

al2o33.50

fe2o2  0.08

cao  9.02

mgo  0.20

ko  0.79

nao  11.55

pbo 0.08

zro 0

zno 0

b2o3 1.01

  采用中性无碱玻璃新材料
 机械性能：抗压强度3300kg/cm2
 显微硬度：（压入硬度）8000kg/cm2
 化学性质：耐酸性在20%hci溶液中煮沸四小时失重0.005mg/cm2。
 耐碱性在1%naoh溶液中煮沸四小时失重0.3mg/cm2
 用　　途：0.2-0.8mm用于油田石油压裂支撑剂、提高出油率。
 0.8-1.21.0-2.0mm用于瓷土，重钙深加工过程的分散剂。
 2.0-3.03.0-4.04.0-5.05.0-6.0用于化工、染料、油漆、油墨生产中的砂磨机中得分散剂。
 耐磨性玻璃微珠使用过程中具有强韧性、不破碎、使用效果好的特点。
 使用说明：
 1、 根据研磨物料的粘度、硬度、分散粒径大小以及研磨要求，选择相应品种、规格和数量的玻璃珠。
 2、 研磨前，清洗玻璃珠和研磨机筒内壁。
 3、 先把需研磨的物料装入研磨机筒内，然后放入适量的玻璃珠。研磨机运行后，再逐渐添入玻璃珠。填装量一般为研磨机筒体容积的70%—85%。
 4、 切勿让玻璃珠在研磨机缺料的条件下长时间运行。否则，玻璃珠在高速运转的研磨机内易被击碎。
 5、 研磨机运行一段时间后，要适量补充玻璃珠，以保证研磨的质量和效能

 glass bead (glass beads)

specification: 60 mesh, 80 mesh, 80 mesh

wear resistant

the chemical composition of %

physical

specifications ф mm

than major, high strength, low abrasion, goodchemical stability, suitable for medium and high viscositymaterial, high solid composition material and ultrafine grinding ofdry and wet grinding, compared with zirconia beads, to small toolswear.

sio2 73.44

weight: 2.8 g/cm3

false: the proportion of 1.65 g/cm3

microhardness: 720 kg/was p

ф 0.6 - ф 0.6 0.6 to 0.8

ф 0.8 - ф 0.8 0.8 to 1.0

ф 1.0 - ф 1.0 1.0 to 1.5

ф 1.5 - ф 1.5 1.5 to 2.0

ф 4.0 - ф 4.0 4.0 to 5.0

al2o33. 50

fe2o2 0.08

cao 9.02

mgo style 0.20

ko 0.79

nao 11.55

pbo (0.08)

zro 0

zno 0

b2o3 1.01

use neutral non-alkali glass new material

mechanical properties: the compressive strength of3300 kg/cm2

microhardness: (pumped) hardness of 8000 kg/cm2

chemical properties: acid in 20% hci solution boilfour hours of 0.005 mg/cm2.

alkali resistance in 1% naoh solution boil four hoursof 0.3 mg/cm2

use: 0.2 0.8 mm used in oil field oil fracturingproppant, improve the yield efficiency.

0.8-1.21.0 2.0 mm for china clay, coarse whitingprocessing process of dispersant.

2.0-3.03.0-4.04.0 5.05.0-6.0 - used in chemicalindustry, dye, paint, printing ink in the production of sand millof dispersant.

abrasion resistance glass beads in use process hasstrong toughness, not broken, used the characteristic with goodeffect.

directions for use:

1, according to the viscosity, hardness, and the sizeof the dispersed particle size of grinding material and grindingre, select varieties, specifications and ofglass beads.

2, grinding, cleaning glass beads and grindingmachine barrel wall.

3, the first need to grind material into the grindingmachine barrel, and then in a moderate amount of glass beads. aftergrinding machine run, then gradually add the glass beads. fill in for grinding machine commonly 70% - 85% of the cylindervolume.

4, do not let the glass bead under the condition ofgrinding machine in long run. otherwise, the glass beads inhigh-speed lapping machine is break.

5, grinding machine operation after a period of time,to a moderate amount of glass beads, to ensure the andefficiency of grinding