遥控触发器 机顶闪光灯离机引闪器触发器 PT-16NE一拖一 触发器-国产一区二区三区内射高清メイリン モデルコレクション メイ|激情浪荡YIN乱之合集

详细参数：
注明：pt-04与pt-16,参数基本一致，只有通道多少区别，其他地方一致。在此统一说明参数。
一个发射器配一根2.5mmpc线，自带12v23a电池，接收器不配连接线不配电池。报价不包括包装，
pt系列机顶闪光灯遥控触发器,以其稳定的性能,合理的价格,得到了用户的广泛好评,利用433m无线调频遥控工作,超长待机功能,宽幅(5v-12v)低电压触发,反应灵触、无频闪、漏闪等不良现象;16通道设计,30米远距离触发,同步速度达1/250.
五大优点：
1、整体高矮设计适中,摄影师在使用时,不会因触发器大高而影响拍摄效果。
2、连接三角架为1/4〞罗母固定,闪光灯不会因松动而倒下的现象；
3、调频开关在外面,随时可调,方便摄影师快速调频,不错过精彩的拍摄；
4、接收器电源为2节aaa电池,摄影师随时随地都可更换电池,不会出现因找电池的烦恼！
5、热靴座采用攻牙式结构,不会出现松脱现象！
（市面上的热靴座多采用自攻罗丝拧紧塑料件，容易松脱）
品名：遥控触发器pt系列
适用对象与作用：适用于专业摄影发烧友、经常使用顶载闪光灯的摄影师； 主要作用于不同品牌机载闪光灯实现离机闪光，方便摄影师补光；
产品特点：三大主流品牌(canon、nilon、sony)触点匹配(索尼新款需增加转换接口)占国内90%以上用户使用；
功能特点：无线遥控离机引闪机载闪光灯，只需数码相机有热靴座，即可离机引闪三大主流品牌机载闪光灯；独具一色的设计，具有全国首款十六通道调频，30米远距离触发，抗干扰能力强；低压（5v-12v）触发、反应灵敏、无频闪、漏闪等不良现象；
材质：原生塑料压模成形，金属材质热靴座、金属插伞座。
其它：发射头自带23a-12v电池，可使用次数达10000次；接收器电池：2*1.5v-aaa(标准七号电池)；
16 channels fm radio wireless remote speedlite flash trigger forcanon nikon pentax olympus
pt-16ne
introduction：
the remote trigger for studio flashes and outdoor flash is used asthe controller of synchronous trigger studio flash of cameras. itconsists of a signal sender and a receiver trigger and works bymeans of the frequency modulation wireless remote control.
the signal transmitter adopts the advanced circuit and components,and can transmit the coded fm wireless signal. the circuit of thetransmitter has the function of standby and hibernation, thus ithas low power consumption; the products can work under the standbymode for more than one year with only one battery; continuouslytrigger for thirty thousand times. the trigger current is only0.01ma, which will definitely cause no damage to the flash contactof the camera. the transmitter is applicable to the traditional ordigital camera with hot shoe or pc controlling interface.
receiver trigger adopts dry battery for power supply, which issafe, energy-saving, and convenient. the product adoptsmicro-computer for controlling the decoding, which has superioranti-interference capability; sensitive reaction speed, the highestsynchronous speed can reach 1/250sec.
all the models of the product uniquely have the multi-freue and the self coding matching function by users.users can freely match and use the sender and the receiveraccording to the demands, which have 16 isolated channels to suitfor specific shooting environments. triggers set in differentchannels can be combined to work or independently work but do notinterfere with each other in an efficient distance.
features:
universal hot shoe interface, compatible with canon, nikon, sigma,olympus, pentax, etc.
globally univeral 433mhz frequency, 16 channels.
with studio flash interface, can trigger several kinds of studioflashes.
transmitting distance up to 30m, no limits with directions orangles.
1/4" nut design to be connected with tripod for stableflashlight.
speedy frequency regulation, convinient for photographers toshoot.
energy-saving design with 12v 23a battery of transmitter and 2 aaabatteries(not included) of receiver.
comes with a pc sync cord for cameras without hot shoe socket.
note: this trigger can not work on ttl mode.
how to use:
1. insert the transmitter's hot shoe socket into your camera's hotshoe jack, plug the flash onto the receiver, switch on thereceiver. make sure the channel selector of both transmitter andreceiver at same channel. press the test button on the transmitterto test before shooting.
2. if your camera has not hot shoe socket for connecting thetransmitter you can connect the transmitter to the camera by the pcsync cord provided. (only the old camera needed).
3. you can trigger both the flashgun and studio lights with thisflash trigger. if you use the receiver on big studio strobeflashlight or ac slave flash, you can just connect the receiver tothe studio strobe flashlight with 3.5mm or 6.35mm jack plug pc synccord(not included).
compatible with:
* canon 580ex ii, 580ex, 550ex, 540ez, 520ez, 430ex/exii, 430ez,420ex, 420ez, 380ex;
* nikon sb-900, sb-800, sb-600, sb-28, sb-27, sb-26, sb-25,sb-24;
* olympus fl-50, fl36;
* pentax af-540 fgz, af-360 fgz, af-400 ft, af-240 ft;
* sunpak auto 2000dz, 622 pro, 433af, 433d, 383, 355afm 344d,333d;
* vivitar 285hv (older vivitar 285/283 works only with pc synccord);
* other flash models with a trigger voltage of 12v or lower.
* work with flash units using universal hot shoe like nikon, sigma,olympus, pentax (except minolta sony, for they use a special hotshoe).
specifications:
power of the signal transmitter: 23a 12v mini battery(included)
power of the receiver(ac): 2 * 1.5v aaa battery(not included)
outdoor working distance: max. 30m / 90feet (open area, nofraise)
indoor operating distance: max. 25m / 75feet
frequency: 433mhz
synchronous speed: max. 1/250sec
package size: approx. 6.6 * 6.6 * 4.5cm / 1.98 * 1.98 * 1.35in
package weight: 84g / 2.96oz
package includes:
1 * 16-channel transmitter(23a 12v battery included)
1 * 16-channel receiver(aaa batteries not included)
1 * pc sync cord(2.5mm to pc)
1 * user manual
the remote wireless flash trigger for studio flashes and outdoorflash is used as the controller of synchronous trigger studio flashof cameras. it consists of a signal transmitter and a receivertrigger and works by means of the frequency modulation wirelessremote control.

本产品的加工定制是是，功能是触发器，通道是16通道