偶联剂KH-570/ A-174/Z-603/ KBM-503-影音先锋资源 av看片站|韩国成人色不雅视频空姐

国外对应牌号　　（美国联碳公司：a-174;美国道康宁公司：z-603;日本信越公司:kbm-503） 　　

化学名称 　　γ―甲基丙烯酰氧基丙基三甲氧基硅烷　　

化学结构式

　　产品性质 　　

本品为甲基丙烯酰氧基官能团硅烷,外观为无色或微黄透明液体,溶于丙酮、苯、yimi、silvhuatan，与水反应。沸点为255℃,密度p25"g/m1：1.040,折光率nd25:1.429,闪点：88℃，含量为≥97%　

　用途及注意事项 　　

1、主要用于不饱和聚脂树脂,也可用于聚氨脂、聚丁烯、聚丙烯、聚乙烯和三元乙丙橡胶。用于玻璃纤维浸润,其主要配方为：偶联剂、抗静电剂、成膜剂、润滑剂、软水等组份,ydh-570在ph3.5-4酸化水中水解，在浸润剂中，偶联剂浓度为0.3%-0.6%，也可根据需要与kh-550或kh-560配制成混合型偶联剂使用。在电线电缆行业，用该偶联剂处理陶土填充过氧化物交联的epdm体系，改善了消耗因子及比电感容抗。　

2、用于白炭黑、滑石、粘土、云母、陶土、高岭土等无机填料的表面处理,以提高对无机材料的粘结力，增加抗水性，降低固化温度。与醋酸乙烯和丙烯酸或甲基丙烯酸单体共聚，这些聚合物广泛用于涂料、胶粘剂和密封剂中，提供优异的粘合力和耐久性。

3、本品遇水水解缩聚成硅醇并受温度、ph值、浓度的影响。避光避湿保存。在25℃以下,以不超过三个月为宜。

硅烷偶联剂kh570必须密封储存，在湿气和热的作用下会发生聚合反应。对皮肤和眼睛有轻微的刺激性，因此使用时要有防护装置。

本品采用5kg塑料桶包装，一箱4桶，共20公斤。其他规格需预定。

foreigncorresponding brand:

americanleague carbon company: a - 174;

u.s. dow corning company: z -603;

japan kbm - the company: letter503

productproperties

this product ismethacryloyl oxygen radicals functional group silane, appearancecolorless or light yellow transparent liquid, soluble in acetone,benzene, ether and carbon tetrachloride, reaction with water.boiling point for 255 ℃, density do "g/m1:1.040, the refractiveindexes, nd25:1.429 and flash point: 88 ℃, content of p97%

purpose and thematters needing attention

1, mainly used inunsaturated polyester resin, can also be used to get togetherammoniac fat, polybutylene, polypropylene and polyethylene andepdm. used for glass fiber infiltrates, and its main recipe for:coupling agent and antistatic agent, into pellicle, lubricants,water softener, etc ydh - 570 m.p., in ph 3.5 to 4 acidificationwater in infiltration agent hydrolysis, concentration, couplingagent for 0.3% - 0.6 percent, can also according to need and kh -550 or kh - 560 made into mixed coupling agent use. in electricalwire and cable industry, with this coupling agent handling argilfilling the peroxide crosslinking, improved the consumption of epdmsystem than inductance rongkang elements and.

2, used for whitecarbon black, talc, clay, mica, clay, kaolin and other inorganicpacking surface treatment of inorganic material, in order toimprove the rapping, increase water resistance, reduce curingtemperature. and acetate and acrylic or methylacrylic acid monomercopolymerization, these polymer widely used in coatings, adhesivesand sealants, provide excellent bonding strength anddurability.

3, this product inwater into silicon alcohol and hydrolysis polycondensation bytemperature, ph value, the concentration of influence. avoid lightavoid wet preservation. at 25 ℃ below, with no more than threemonths advisable.

silane coupling agentshall be sealed storage, kh570 in moisture and hot under the actionof polymerization will happen. on skin and eyes have mildirritation, so when used to have protection device.

this article adoptsthe 5kg packed in plastic drum, a box of four barrels, total 20kilograms. other specifications need reservation.